Mounting Options

deSIGNery Signs has been designing and selling for more than 29 years.
29

Minnesota (injection molded) Letters Mounting options



Image of 1A-Plain mounting for Minnesota Letters
1A-Plain
Image of 2a-stud mounting for Minnesota Letters
2A-Stud
Image of 2b-pad mounting for Minnesota Letters
2B-Pad
Image of 2c-combination mounting for Minnesota Letters
2C-Combo
Image of 2d-combination-all mounting for Minnesota Letters
2D-Combo All
Image of the use of drill pattersn for Minnesota Letters
Drill Patterns

MOUNTING OPTIONS

Any of the mounting options listed are included in the price listed. If your application does not require mounting, select 1A-Plain for an additional 10% discount.

All mounting options are described below.

1A-PLAIN MOUNT Minnesota Letters are supplied with no mounting hardware, Display Letters can be attached to mounting surface with a combination of adhesive or double-faced tape – applied by installer – based on surface and letter weight. A1-Plain also qualifies for an additional 10% discount.

2A-STUD MOUNT Threaded blocks are solvent bonded to the letter returns to receive a 10-24 stud. Silicone adhesive is applied to the studs and into the drilled holes when installing. Drilling pattern is required for this installation.

2B-PAD MOUNT Threaded blocks are solvent bonded to the letter returns to receive the perforated pad. Silicone adhesive is used to adhere the perforated pads to the installation surface. Spacing guides are available for this installation. ** Most letters 9” and under will have perforated pads bonded directly to the letter back and will have a slight stand-off.

2C-COMBINATION MOUNT Threaded blocks are solvent bonded to the letter returns. The top portion of the letter receives stud through pads and the bottom pad only. Mounting procedure is the same as 2a Stud with the addition of securing pads to the installation surface with silicone. Drilling pattern is required for this installation. ** Most letters 9” and under will have perforated pads bonded directly to the letter back and will have a stand-off.

2D-COMBINATION ALL MOUNT Threaded blocks are solvent bonded to the letter returns. All mount locations receive a stud through pad. Mounting procedure is the same as 2a Stud with the addition of securing pads to the installation surface with silicone. Drilling pattern is required for this installation.

DRILL PATTERNS Patterns are not sent with orders unless requested. All stud mounted or combination mounted letters will require some type of drilling template to install.